2018年2月全国电力安全生产情况

Introduction

百度 捍卫宪法尊严，就是捍卫党和人民共同意志的尊严。

Drone security is crucial due to their widespread adoption in industries such as military, construction, and community services. With the increasing use of drone swarms, even minor security lapses can lead to significant risks.

This cheat sheet provides an overview of vulnerable endpoints in drone systems and strategies to mitigate security threats.

---

Drone System Components

A typical drone architecture consists of three main components:

1. Unmanned Aircraft (UmA) – The physical drone itself, including its sensors and onboard systems.
2. Ground Control Station (GCS) – The interface used to control and monitor drone operations.
3. Communication Data-Link (CDL) – The network connection between the drone and the GCS.

The communication between the drone and the GCS is vulnerable to interception and attacks. This will be made evident in the future sections as well. It is important to understand that peripherals attached to drone may be vulnerable too! To explain this, we have made a list of vulnerable endpoints below.

---

Vulnerable Endpoints & Security Risks

1. Communication Security

• Insecure Communication Links – Data transmitted between the drone and GCS can be intercepted if not properly encrypted. Use standard protocols for encryption of any data being sent over.

• Spoofing and Replay Attacks – If the drone uses a GPS module then data spoofing and command replay attacks can also become a reality. Again encrpyted data transfer is the best way to go forward. There are many more methods, which have been discussed here

• Wi-Fi Weaknesses – Weak authentication or unprotected channels can allow unauthorized access. This is even possible through simple microcontrollers like ESP8266!

  • Use 802.11w MFP (Management Frame Protection) to prevent Wi-Fi deauthentication attacks. Don't worry, if your Wi-Fi systems are up to date, then this is a default protocol now.

2. Authentication & Access Control

Most drone controllers use 2 sets of computers,

1. The main chip that performs the PID control and handles motors

2. An additional SoC (called the companion computer) to manage peripherals (like the cameras, LiDARs etc.) and send telemetry data.

Thus, it becomes very important to maintain their security as well. The possible risks in this case are:

• Companion Computers – Open ports (e.g., SSH, FTP) can be exploited if not securely configured.

• User Error and Misconfiguration – Misconfigured security settings can expose the drone to risks.

3. Physical Security

If your drone is ever captured or lost, you should ensure that its not physically possible to steal data from it. This may happen under the following conditions:

• Insufficient Physical Security – Unsecured USB ports or exposed hardware can lead to data theft or tampering.

• Insecure Supply Chain – Compromised components from suppliers can introduce hidden vulnerabilities.

• End-of-Life Decommissioning Risks – Improperly decommissioned drones may retain sensitive data or be repurposed maliciously.

4. Sensor Security

With drones implementing control logic depending on how close they are to other drones or aerial vehicles, manipulating sensor data can be disastrous!

Attackers can manipulate drone sensors (GPS, cameras, altimeters) to feed incorrect data. Think of this more like how stuxnet changed the speed of the Uranium centrifuges in Iran while still reporting the speed as normal.

To prevent this, there is new research being developed involving watermarked signals whose entropy can be used to determine if the sensor values are correct of not. Read more about this method here.

5. Logging & Monitoring

• Inadequate Logging and Monitoring – Without sufficient monitoring, security breaches or operational anomalies may go undetected.

• Integration Issues – Some cameras require webserver configurations, and if poorly integrated, these web servers on cameras or telemetry systems may expose vulnerabilities that can be used to gather sensitive information.

To prevent this, ensure that your credentials are strong!

---

Secure Communication Protocols

Below are some protocols used by drone systems to communicate. This can be either between each other (if in a horde) or with the ground stations. We have mentioned what can go wrong with each protocol and also provided recommendations.

1. MAVLink 2.0 – A widely used protocol for communication between drones and ground control stations (GCS).

• Implement message signing to prevent spoofing and replay attacks.

• You must secure heartbeat messages to avoid command injection vulnerabilities. A heartbeat message is usually a single byte that is sent at a certain frequency to all other nodes, informing of the device's existence. The frequency is important here!

• Tools like ArduPilot and PX4 support MAVLink 2.0 security enhancements. There are thoroughly tested softwares and hence recommended.

• Utilize end-to-end encryption! Either through TLS or DTLS is fine and good.

2. CAN (Controller Area Network) Bus – A communication protocol used between internal drone system components (e.g., flight controllers, ESCs, GPS modules).

• Most attacks require physical access to exploit CAN. It works on a differential signal and hardware hacking may be possible by tapping into them.

• There exist tools like DroneCAN which make using secure CAN communications easy.

3. ZigBee – A low-power wireless protocol often used for telemetry and sensor communication in backup systems.

• This has a way to enable AES-128 encryption to secure transmissions. Make sure you do that.

• Deploy network keys with frequent rotation to prevent key compromise. Read more about key rotations here.

• Monitor for ZigBee packet sniffing attacks using SDR-based tools like HackRF or YARD Stick One.

4. Bluetooth – Used for device connections, such as drone controllers or mobile applications.

• You must enforce Strict Pairing Modes that is LE (Low Energy) Secure Connections over Bluetooth 4.2+. This uses the Elliptic curve Diffie-Hellman cryptosystem to generate keys. Essentially, its state of the art.

• Pairing methods such as Just works are vulnerable to MITM attacks! Do not use them if you're setting up your own Bluetooth adapters.

5. Wi-Fi (802.11a/b/g/n/ac/ax) – A common method for FPV (First Person View) video transmission and drone control.

• Make sure that you are using WPA3 encryption for the highest level of security. Note that protocols like WEP are vulnerable!

• Use 802.11w Management Frame Protection (MFP) to mitigate deauthentication attacks (these are crafted packets that emulate a server and cause deauthentication).

• Disable SSID broadcasting and use MAC filtering where feasible. This is advisable because it essentially hides your drone's Wi-Fi adapters from simple scans.

By implementing these security measures, drone operators can significantly reduce the risks of cyberattacks and unauthorized access to UAV communication systems.

Summary

The following table summaries the different attack vectors for a drone system.

Attack		Targets					Security Measures
Type	Nature	Privacy	Data Confidentiality	Integrity	Accessibility	Authentication	Non-Cryptographic	Cryptographic
Malware	Infection	x	x	x	x	x	Control access, system integrity solutions and multi-factor authentication	Hybrid lightweight Intrusion Detection System
BackDoor Access	Infection	x	x	x	x	x	Multi-factor robust authentication scheme	Hybrid lightweight Intrusion Detection System, vulnerability assessment
Social Engineering	Exploitation	x	x	-	-	x	N/A	Raising awareness, training operators
Baiting	Exploitation	x	x	x	-	x	N/A	Raising awareness, training operators
Injection/Modification	Exploitation	x	-	x	-	-	Message authentication or digital signature	Machine-Learning hybrid Intrusion Detection System, timestamps
Fabrication	Exploitation	x	-	x	-	x	Multi-factor authentication, message authentication or digital signature	Assigning privilege
Reconnaissance	Information gathering	x	x	-	-	-	Encrypted traffic/stream	Hybrid lightweight Intrusion Detection System
Scanning	Information gathering	x	x	x	-	-	Encrypted traffic/stream	Hybrid lightweight Intrusion Detection System or Honeypot
Three-Way Handshake	Interception	-	-	-	x	x	-	Traffic filtering, close unused TCP/FTP ports
Eavesdropping	Interception	x	x	-	-	-	Securing communication/traffic, secure connection	N/A
Traffic Analysis	Interception	x	-	-	-	-	Securing communication/traffic, secure connection	N/A
Man-in-the-Middle	Authentication	x	x	x	-	-	Multi-factor authentication & lightweight strong cryptographic authentication protocol	Lightweight hybrid Intrusion Detection System
Password Breaking	Cracking	x	x	x	x	-	Strong periodic passwords, strong encryption	Lightweight Intrusion Detection System
Wi-Fi Aircrack	Cracking	x	x	x	x	-	Strong & periodic passwords, strong encryption algorithm	Lightweight Intrusion Detection System at the physical layer
Wi-Fi Jamming	Jamming	x	x	x	x	-	N/A	Frequency hopping, frequency range variation
De-Authentication	Jamming	x	x	x	x	-	N/A	Frequency hopping, frequency range variation
Replay	Jamming	x	x	x	x	-	N/A	Frequency hopping, timestamps
Buffer Overflow	Jamming	x	x	x	x	-	N/A	Frequency hopping, frequency range variation
Denial of Service	Jamming	x	x	x	x	-	N/A	Frequency hopping, frequency range variation
ARP Cache Poison	Jamming	x	x	x	x	-	N/A	Frequency hopping, frequency range variation
Ping-of-Death	Jamming	x	x	x	x	-	N/A	Frequency range variation
GPS Spoofing	Jamming	x	x	x	x	-	N/A	Return-to-base, frequency range variation

There are multiple GitHub repos that help with drone attack simulations and actual exploits. Be sure to check them out too for a deeper understanding of drone security.

References

• ESP8266 Wi-Fi deauther

• Command Injection explanation

• key rotations at certain frequencies

• Vulnerable Just works bluetooth protocol

• Drone Exploit Module

• Vulnerable Drone System Simulation

• Drones from a Cybersecurity Perspective

• Dynamic Watermarking in UAVs

• GPS spoofing and prevention